Parts for Kenmore Models 7430A REV B

Lint filter - white frame (trap lint)

The lint filter is used to collect lint and debris as it passes through the dryer vent. It is recommended to clean the lint filter before every load. If your dryer takes too long to dry, the lint filter frame becomes damaged or the filter has torn you may need to replace the lint filter. The frame is white in color. This is a genuine OEM part.

Easy Part #:: EAP11767017

Availability:: In Stock - Ships Today

Price:: $65.06

Idler pulley (use wpl 279640)

A dryer's idler pulley helps the belt to rotate the drum. It is also known as dryer belt tension pulley wheel.

Easy Part #:: EAP334244

Availability:: In Stock - Ships Today

Price:: $23.43

Water inlet valve with mounting bracket (valve)

The water fill valve kit attaches the water lines on the back of your washer. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. This kit includes a blue body fill valve, a mounting bracket and a screw. The valve body of this part could be blue or green in color. There are two ports for water to enter, and this valve is compatible with a half inch ID hose. It has two 3/4-11x1/2 NHT hose threads. This is a genuine OEM part. Please remember to disconnect the power and the water supply before starting your repair.

Easy Part #:: EAP334646

Availability:: In Stock - Ships Today

Price:: $32.08

Drip bowl - 8 inch (chrome drip bowl (pan) for 8-inch burner on electric range. This drip bowl sits underneath the heating element to catch drips or spills.)

The chrome drip bowl is located under the burner element to catch anything that may spill over to make cleaning up spills quick. This drip bowl is eight inches in size and is intended for use with rolled terminal style plug-in surface element units. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP244696

Availability:: In Stock - Ships Today

Price:: $20.09

Surface burner plug-in block kit (sub 0089336)

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw. This part is used to connect the wire harness to the surface burner element. If your element will not heat at all, or if it is not heating properly, it is likely an issue with the terminal block and it will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power supply before starting your repair.

Easy Part #:: EAP340571

Availability:: In Stock - Ships Today

Price:: $12.49

Freezer door key

This white plastic freezer door key is used for most upright or chest freezers. If your door key becomes broken or lost it will need to be replaced. This is a genuine OEM part. It is sold individually.

Easy Part #:: EAP1991481

Availability:: In Stock - Ships Today

Price:: $10.45

Multi rib belt (multi rib belt - 93-1/2")

This dryer drum belt from Whirlpool/Kenmore has five ridges. It is used for many of Whirlpool's brands of clothes dryers. This flat belt is 1/4 of an inch wide.

Easy Part #:: EAP382430

Availability:: In Stock - Ships Today

Price:: $20.42

Water valve with guard (water valve asm)

This double inlet water valve has quick connections. This valve has 1/4 and 5/16 John Guest fittings for the outlet lines and a 1/4 compression fitting for the inlet line.

Easy Part #:: EAP16226572

Availability:: In Stock - Ships Today

Price:: $76.66

Igniter kit (use wpl 279311)

This silicon carbide igniter with ceramic holder kit includes the 3-inch flat igniter, mounting bracket, 4-inch wire leads, and the plug. It can replace both round and flat igniters. This kit is used for many gas clothes dryers. This part ignites the gas within the dryer to heat the dryer during the cycle, so if your dryer takes too long to dry, has no heat or not enough heat, you may need to replace the igniter. Be sure to disconnect the power source from your dryer before you do this repair. The igniter is very fragile and should be handled with care.

Easy Part #:: EAP334180

Availability:: In Stock - Ships Today

Price:: $34.93

Lower rack (rack asm final lower)

The lower rack provides easy loading with flexibility for small and large items, and helps hold the dishes in place during the wash and dry cycle. The rack measures approximately 20.48 X 21.99 and the wheels are included with the rack. This is a genuine OEM part and is white in color.

Easy Part #:: EAP17137102

Availability:: In Stock - Ships Today

Price:: $178.97

Bake element - push on terminals - 240v (bake element)

The bake element is located on the bottom of the oven with male spade terminals and push-on terminals. The bake element provides heat for baking. If your oven is too hot, not heating evenly, element is not heating, or little to no heat when baking, you may need to replace your bake element. This is a genuine OEM part. Please remember to disconnect the power to the range before starting your repair.

Easy Part #:: EAP249238

Availability:: In Stock - Ships Today

Price:: $82.03

Infinite burner switch (infinite burner switch - large element - 240v)

This surface burner switch controls the stove top 8-inch surface burner temperature. This switch is 240-volt, 2100-2600 watt, and 8.8-10.8 amp. If your element is not defective but will not heat, you may need to replace the switch. This burner switch is a genuine OEM part. It is recommended to disconnect the power to your range before you start your repair.

Easy Part #:: EAP1145040

Availability:: In Stock - Ships Today

Price:: $39.52

Crisper glass shelf insert (insert-pan cover)

Glass only. This glass insert measures 23.82 x 15.50-in. This is an authentic Frigidaire replacement part. The crisper shelf insert is designed by the manufacturer for use in refrigerators. This part is made of glass, and is placed over the crisper pan drawers. No tools are required when replacing this item. Simply remove the old part and slot the new one into place. This item is sold individually.

Easy Part #:: EAP429963

Availability:: In Stock - Ships Today

Price:: $90.88

Thermal cut-off kit (cutoff-tml)

This kit includes one high limit thermostat with a limit of 250 degrees Fahrenheit, and one thermal cut-off fuse with a limit of 360 degrees Fahrenheit. The thermostat and fuse help prevent the dryer from overheating.